The Model 2085 high speed RS-232 to RS-485 interface converter supports async RS-232 data rates to 115.2 kbps over 2-wires or 4 wires. Passing one control signal in each direction, the Model 2085 can handle up to 50 terminal drops in a multipoint polling environment. The Model 2085 has five configuration parameters, allowing the unit to be "fine tuned" to a variety of point-to-point or multipoint applications. In addition, Silicon Avalanche Diodes provide 600 watts per wire of protection against harmful data line transient surges

Transmission Format: Asynchronous
Data Rate: Up to 115,200 bps
Range: Up to 9 miles (14.5km)
RS-232 Interface: DB-25, male or female (DCE/DTE switchable)
RS-485 Interface Options: DB-25, male or female; RJ-11 or RJ-45 jack; terminal block with strain relief
Control Signals: DSR turns "ON" immediately after the terminal raises DTR; DCD turns "ON" after recognizing the receive signal from the line; CTS turns "ON" after the terminal raises RTS.
RTS/CTS Delay: 0 msec or 8 msec
Carrier: The carrier is switch selected either continuous operation or controlled by RTS
Power: Draws operating power from RS-232 data and control signals; no AC power or batteries required.
Temperature: 32° to 122° F (0° to 50° C)
Size: 2.66" x 2.10" x 0.73" (6.8 x 5.3 x 1.9 cm)

2085F RS232 DB25 FEMALE TO RS485 TERMINAL BLOCK
2085F-25F RS232 DB25 FEMALE TO RS485 DB25 FEMALE
2085F-25M RS232 DB25 FEMALE TO RS485 DB25 MALE
2085FDR11 RS232 DB25 FEMALE TO RS485 DUAL RJ11
2085FDR45 RS232 DB25 FEMALE TO RS485 DUAL RJ45
2085FRJ11 RS232 DB25 FEMALE TO RS485 RJ11
2085FRJ45 RS232 DB25 FEMALE TO RS485 RJ45

2085M RS232 DB25 MALE TO RS485 TERMINAL BLOCK
2085M-25F RS232 DB25 MALE TO RS485 DB25 FEMALE
2085M-25M RS232 DB25 MALE TO RS485 DB25 MALE
2085MDR11 RS232 DB25 MALE TO RS485 DUAL RJ11
2085MDR45 RS232 DB25 MALE TO RS485 DUAL RJ45
2085MRJ11 RS232 DB25 MALE TO RS485 RJ11
2085MRJ45 RS232 DB25 MALE TO RS485 RJ45