The Patton EPG TS Series lets you design your own "custom" surge protector to fit just about any 2, 4, 6, 8 or 10 wire application. How does it work? First you specify the number of lines you need protected. Then you specify the clamping voltage (ex. 18V for RS-232, or 7.5V for RS-422, RS-485, Token Ring or Ethernet) that is optimum for your application. Each surge protector comes with input/output terminal strips and strain relief straps. Simply attach your stripped wires to the surge protector and terminate the ends with whatever connectors you choose.
The TS Series provides reliable, transparent protection at data rates up to 20 Mbps, so you can be confident using these protectors in a wide variety of LAN, WAN and datacom environments. Surge energy is intercepted by a solid state hybrid circuit and diverted safely to chassis ground through a braided metal strap. The TS Series can handle repeated surge "hits" up to 1.5 k Watts without degrading in performance.

- Choose from 2, 4, 6, 8 or 10-Wire Terminal Strip Configurations
- Clamping Voltages for RS-232, RS-422, RS-485, Token Ring or Ethernet
- Supports Async or Sync Data Rates up to 20 Mbps
- Strain Relief Straps Hold Wires Firmly in Place
- Surge Handling Capacity of 1500 Watts
- Surge Energy Diverted to Ground through Braided Metal Strap
- Screw Terminals or "Quick Connect" Terminals Available (18 - 28 AWG)