We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy to do so

CL1214E CopperLink Industrial High Speed Multi-Port Copper Ethernet Extender -168 Mbps

New 5-7 Days CL1214E CopperLink Industrial High Speed Multi-Port Copper Ethernet Extender -168 Mbps

The Industrial Grade Patton CopperLink CL1214E is perfect for bandwidth-intensive applications and can deliver off-the-chart symmetrical line rates greater than 100 Mbps. Best of all like all CopperLink™ products—the CL1214E utilises existing copper infrastructure to deliver high-speed Ethernet connectivity over voice-grade twisted pair, Cat 5e/6/7, and—new to the CopperLink™ line—coaxial cabling. and is designed to operate in harsher environments

Four user-selectable configuration profiles—combined with Patton’s auto-rate adaptation feature—ensure maximum achievable symmetrical or asymmetrical rates for the installed noise environment, wire gauge/type and length.

Symmetrical line-rate settings are ideal for such applications as remote LAN extension, video teleconferencing, and data backhaul. Asymmetrical configurations are well-suited for applications requiring higher downstream speeds and/or longer distances between Ethernet devices. Typical symmetrical scenarios include medical imaging, livestock monitoring, underwater video, internet gaming, and transporting high-resolution IP video from security cameras.

Realise fibre-like speed and distance without the expense of fibre with Patton’s Ultra-High-Speed CopperLink™ Ethernet Extenders. 


NOTES FOR ORDERING: 


RJ45 Line

CL1214E/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; RJ45 Connector; 100-240VAC

CL1214E/12 Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; RJ45 Connector; -12VDC Input


Terminal Block (TB) Line

CL1214E/TB/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; Terminal Block Connector; 100-240VAC

CL1214E/TB/12 Industrial  Extended Temperature CopperLink High Speed Auto Rate Extender; Terminal Block Connector; -12VDC Input


BNC Coax Line

CL1214E/BNC/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; BNC Connector; 100-240VAC

CL1214E/BNC/EUI-2PK Industrial Extended Temperature CopperLink High Speed Auto Rate Extender Kit; BNC Connector; 100-240VAC


Conformal Coated

CL1214E/CC/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; Conformal Coated; RJ45 Connector; 100-240VAC

CL1214E/CC/12 Industrial  Extended Temperature CopperLink High Speed Auto Rate Extender;Conformal Coated; RJ45 Connector; -12VDC Input

CL1214E/CC/TB/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; Conformal Coated; Terminal Block Connector; 100-240VAC 

CL1214E/CC/TB/12 Industrial  Extended Temperature CopperLink High Speed Auto Rate Extender; Conformal Coated; Terminal Block Connector; -12VDC Input



- Ethernet Extension— Extend 10/100Base-TX Ethernet well beyond its 100-meter limitation over a single unshielded twisted pair (UTP) or Cat 5e/6/7 cable.

- Industrial Grade - Operating temperature of -40 to 85°C and optional conformal coating to protect against condensing humidity.

- Plug and Play—Set these units up straight out of the box. No configuration is required. Auto-sensing 10/100 Ethernet ports support full or half duplex operation.

- Transparent LAN Bridging - Bypass network configuration requirements by transparently passing all higher layer protocols—including 802.1Q VLAN frames (tagged and untagged). Data-transmission mechanism is fully transparent to such IP video compression schemes as MPEG-4, H.264 and MJPEG.

- Flexible Installation - Wall-mount ready and an optional DIN rail mounting kit is available.

- Multiple Line Rates Supported—Switch-selectable rate mode options optimize rate and reach for the noise environment, wire gauge/type and length.

- Made in the USA — The CL1214E is designed by Patton engineers and built in their Gaithersburg, Maryland USA facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

Rate/Reach

Long Range Asymmetrical:

- 250 feet (73 m): Downstream (DS)]67 Mbps/Upstream (US) 16 Mbps 

 - 0,000 feet (3 km): DS 4 Mbps/US 263 kbps

Long Range Symmetrical: 

- 250 feet (73 m): DS 68 Mbps/ US 50 Mbps 

- 10,000 feet (3 km): DS 2.5 Mbps/US 1 Mbps

High Speed Asymmetrical: 

 - 250 feet (73 m): DS 168 Mbps/US 95 Mbps

 - 3,500 feet (1 km): DS 35 Mbps/US 1 Mbps

High Speed Symmetrical: 

- 250 feet (73 m): DS 121 Mbps/US 144 Mbps 

- 3,500 feet (1 km): DS 30 Mbps/US 4 Mbps

CopperLink Line Interface

- RJ-45 (pin 4 = ring; pin 5 = tip)

- Terminal block, 2-position

CopperLink Line Modulation

- DMT (Discrete Multi-Tone) 

Enclosure

- IP 40 rated • aluminum 

Ethernet Interface (x4)

- 8-position shielded RJ-45. Auto-sensing 10/100Base-TX with half or full duplex operation. 

Protocol

- Transparent to high layer protocols: supports 802.1Q VLAN tagged or untagged frames. Transparent to IP Video schemes: fully transparent to such compression schemes as MPEG-4, H.264, and MJPEG. 

Impulse Noise Protection Modes

- Selectable fast and interleave modes 

Target SNR Modes

- 6 dB & 9 dB 

Management

- 8-position DIP switch 

Monitoring

- 8 LEDs display Power, Link, Ethernet 1–4, Remote, and Local status. 

Power Supply

- External AC: 100–240 VAC 

- Internal DC: -12 VDC 

Compliance

- FCC Part 15A, CE Mark, EMC Directive 89/336/EEC, Low-Voltage Directive 73/23/EEC 

Dimensions

15.74 (W) x 3.18 (H) x 12.07 (L) cm 

Weight

181 g 


A built-in 4-port Ethernet switch makes the CopperLink 1214E ideal for delivering multiple IP information streams over a single cable. For example, at a guardhouse or security kiosk, you could aggregate IP data from a laptop, a motion sensor, and two high resolution IP video cameras for simultaneous transmission over a single Ethernet connection. 


Combining data flows from up to four network-enabled devices onto a single twisted pair, the Model 1214E can deliver IP traffic up to 1.8 miles (3 km) away—well beyond the standard 100-meter Ethernet distance limitation. 


With achievable line rates up to 168 Mbps, the CopperLink 1214E eliminates the bandwidth constraints commonly experienced with other copper-based transmission technologies. The Model 1214E is engineered to re-use existing infrastructure previously employed in legacy applications including alarm circuits, E1/T1 circuits, RS-232, RS-422, RS-485, CCTV and CATV. Many newer cabling standards are also supported, including Cat 5e, Cat 6, and Cat 7. 



CopperLink™ 1214E application diagram


RJ45 Line

CL1214E/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; RJ45 Connector; 100-240VAC

* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214E/12 Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; RJ45 Connector; -12VDC Input
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

Terminal Block (TB) Line
CL1214E/TB/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; Terminal Block Connector; 100-240VAC
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214E/TB/12 Industrial  Extended Temperature CopperLink High Speed Auto Rate Extender; Terminal Block Connector; -12VDC Input
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

BNC Coax Line
CL1214E/BNC/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; BNC Connector; 100-240VAC
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214E/BNC/EUI-2PK Industrial Extended Temperature CopperLink High Speed Auto Rate Extender Kit; BNC Connector; 100-240VAC
* * Includes Transmitter (Local) and Receiver (Remote) and PSUs


Conformal Coated
CL1214E/CC/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; Conformal Coated; RJ45 Connector; 100-240VAC
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214E/CC/12 Industrial  Extended Temperature CopperLink High Speed Auto Rate Extender;Conformal Coated; RJ45 Connector; -12VDC Input
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214E/CC/TB/EUI Industrial Extended Temperature CopperLink High Speed Auto Rate Extender; Conformal Coated; Terminal Block Connector; 100-240VAC 
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU

CL1214E/CC/TB/12 Industrial  Extended Temperature CopperLink High Speed Auto Rate Extender; Conformal Coated; Terminal Block Connector; -12VDC Input 
* Single unit for use as Transmitter (Local) or Receiver (Remote) and PSU
  • £0.00

Available Options

Tags: cl1214e, CL1214ebnc, cl1214eeui2pk, cl1214etbeui