We use cookies to ensure that we give you the best experience on our website. If you continue to use this site we will assume that you are happy to do so

CL1151E CopperLink Dante over Copper 10/100 Extender

New In Stock CL1151E CopperLink Dante over Copper 10/100 Extender

Patton CL1151E CopperLink Dante over Copper 10/100 Extender

Demand for IP/Ethernet-connected devices in the Audio Video space is growing rapidly. Power-over-Ethernet (PoE) in particular—has grown in popularity because it strikes the perfect blend of speed, cost, and ease of use. 

Ethernet however, presents a few drawbacks that may overshadow the benefits by creating escalating infrastructure costs and system downtime. The Ethernet standard specifies a distance limitation of 328 ft (100 m), which restricts location options for device installation. Standard Ethernet also requires Cat 5 cabling or better, which often leads to installing new cabling infrastructure—involving tearing into walls, ceilings, pavement, and worse.

The Patton CopperLink 1151E kit enables Ethernet connectivity of your Dante enabled devices over previously installed copper infrastructure, such as existing speaker, alarm cables even CCTV coaxial cable.  

Instantaneously install your 10/100BaseTX Dante enabled speakers, I/O converters and more—with no additional overhead cost. With the extended reach the CL1151E kit provides, you can install your IP Audio Video and teleconferencing equipment exactly where you want it.

CopperLink™ 1101E application diagram 4

Ordering Information

CL1151E/PAFA/TB/EUI-2PK CopperLink Industrial Dante and PoE+ Ethernet Extender Kit (Local and Remote); 2 Wire Terminal Block Line; 1 x 10/100; 802.3at; 100-240VAC

CL1151E/PAFA/BNC/EUI-2PK CopperLink Industrial Dante and PoE+ Ethernet Extender Kit (Local and Remote); BNC Coaxial Line; 1 x 10/100; 802.3at; 100-240VAC

- Dante Ethernet Extension—Extends 10/100Base-TX Ethernet over 3,300 feet (1005 meters) using 2-wire, 18-26-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable.

- Delivers PoE—PowerPlus technology powers up both the remote CopperLink extender and the Dante PoE enabled device connected to it. No power is required at the remote location.

- Transparent LAN Bridging—Will pass higher layer AES67/TSN/AVB protocols and all audio/video compression schemes.

- Plug and Play—Modems need no configuration to operate, Ethernet ports are auto-sensing 10/100, full or half-duplex.

- Overvoltage Protection—Overvoltage protection on Line and Ethernet ports prevents damage from ESD (electrostatic discharge), CDE (cable discharge events), and lightning.

- Industrial Grade Design - minus - 10 to + 75 Degrees C operating temperature. Multiple mounting options including Din-Rail Mount.

-Made in the USA— Designed by Patton engineers and built in Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.

Line Interfaces (Data)
  • 1 x RJ45 or BNC (Coax)
  • Supports 1-4 pairs
Ethernet Interfaces
  • 1 x RJ45 Auto-Sensing 10/100Base-TX with full or half-duplex operation
  • Power, Line, (10 or 100 operation), Eth, and PoE
  • Transparent to high layer AES67/AVB/TSN Ethernet protocols.
  • Supports 802.1Q VLAN tagged frames
  • Transparent to IP video schemes
  • Fully transparent to compression schemes such as WMV, MPEG-4, and MJPEG
Overvoltage Protection (Line and Ethernet)
  • IEC 61000-4-2 (ESD) 25kV (air), 15kV (contact)
  • IEC 61000-4-4 (EFT) 40A (5/50ns)
  • IEC 61000-4-5 (lightning) 25A (8/20μs)
Power Injection (PSE only)
  • DC voltage on Ethernet port
  • 54 VDC
Power Consumption
  • 1.5 W
Power Supply
  • External AC Adapter 100–240 VAC to 54 VDC
  • Input: 30–57 VDC (Recommended 54 VDC)
  • 83,043 hours
  • Temperature: -10 to 70°C
  • Humidity: 10 to 95% (non-condensing)
  • 1.19 W x 4.28 H x 3.36 D in. (30.2 W x 108.7 H x 85.3 D mm)
  • 0.78 oz (22 g)
  • FCC Part 15A, Class B
  • CE Mark
  • EMC Directive 89/336/EEC
  • LVD Directive 73/23/EEC

RG-59 Coax Data Reach Estimates
Description10 Mbps100 Mbps
Min. distance
6 ft
1.83 m
6 ft
1.83 m
Max. distance4925 ft
1501 m
1225 ft
373 m
Min. distance link time
5 sec5 sec
Max. distance link time
5–10 sec5 sec
Max. distance PoE class
Class 2/3Class 4

RG-59 Coax Power Delivery Estimates
PoE ClassRG-59
(3.84 W)
4975 ft
1516 m
(6.49 W)
4975 ft
1515 m
(12.95 W)
3925 ft
1196 m
(25.50 W)
1675 ft
511 m

Twisted-Pair Data Reach Estimates
 10 Mbps100 Mbps
Description2 wire4 wire2 wire4 wire8 wire
Min. distance
6 ft
1.83 m
131 ft
39.9 m
6 ft
1.83 m
6 ft
1.83 m
6 ft
1.83 m
Max. distance
2500 ft
762 m
3300 ft
1005 m
915 ft
278.9 m
1065 ft
324.6 m
1849 ft
563.6 m
Min. distance link time5 sec157 sec5 sec5 sec5 sec
Max. distance link time5–10 sec8–265 sec5 sec6 sec6 sec
Max. distance PoE classClass 1Class 2Class 2/3Class 4Class 3/4

Twisted-Pair Power Delivery Estimates
PoE Class2 wire4 wire6 wire8 wire
(3.84 W)
2648 ft
807 m
5453 ft
1662 m
8363 ft
2549 m
11555 ft
3521 m
(6.49 W)
1587 ft
484 m
3322 ft
1012 m
5041 ft
1536 m
6905 ft
2104 m
(12.95 W)
794 ft
239 m
1587 ft
484 m
2519 ft
768 m
3453 ft
1052 m
(25.50 W)
262 ft
80 m
653 ft
199 m
1196 ft
365 m
1587 ft
484 m
Class 2/3Class 2/3Class 4Class 4Class 4

Extend Power and Ethernet to compliant or legacy PoE devices using already installed twisted-pair cable or coax.

CopperLink™ 1101E application diagram 4
  • £0.00

Available Options